Pushin 8mm Fittings

Pushin 8mm Fittings, OD line, fittings are used for the quick method of connecting your gas and liquid beer line to the disconnects.

Suitable for up to 100 psi.

OD outside diameter of line

ID inside diameter of line

No need to purchase clamps.

To remove the fitting simply push in the collet and the hose can be removed.

Ball Valve 8mm Push in

 

Plug 8mm Push in

Plug 8mm used to block off the connection, blocks the flow.

One Way Check Valve 8mm push in type

Every keg set-up should have one.

This handy device will ensure you protect your regulator against reversal of flow in your lines.

Note: the red end is the output

Tee Push in – Equal two line connection 8mm

Allows you to connect two lines.

Y Push in – Equal two line connection 8mm

Allows you to run two lines in different directions.

Elbow Push in – 8mm x 8mm

Allows you to direct a 90 degree angle.

These great little adapters screw directly onto threaded disconnect

Fits both gas and liquid

Keg Coupler  5/8 BSP to 8mm line

Allows you to connect to the Keg Coupler

Fits both gas and liquid